Like traditional electronic products, LED display screens not only need to pay attention to methods during use, but also need to carry out maintenance on the display to make the LED display screen have a longer lifespan. Let's take a look at the maintenance methods for LED display screen!

LED display screen maintenance method:

1. Maintain the humidity of the environment in which the full color LED display screen is used, and do not allow anything with the nature of moisture to enter your full color LED display screen. Powering up a large full-color display screen containing humidity can cause corrosion of full-color display components, which can lead to permanent damage.

2. To avoid possible problems, we can choose between passive protection and active protection, try to keep objects that may cause damage to the full color display screen away from the screen, and when cleaning the screen, wipe it as gently as possible to minimize the possibility of injury.

3. The large screen of LED full color display has the closest relationship with our users, and it is also necessary to do a good job of cleaning and maintenance. Exposure to wind, sunlight, dust, etc. for a long time in an outdoor environment can easily cause dirt. After a period of time, the screen must be covered with dust, which requires timely cleaning to prevent dust from covering the surface for a long time and affecting the viewing effect.

4. It is required that the power supply be stable and well grounded. Do not use it in harsh natural conditions, especially in strong lightning weather.

5. Water ingress, iron powder, and other easily conductive metal objects are strictly prohibited inside the screen. The large screen of LED display screen should be placed in a low dust environment as much as possible. Large dust can affect the display effect, and excessive dust can cause damage to the circuit. If water enters the screen due to various reasons, please immediately power off and contact maintenance personnel until the display panel inside the screen is dry before use.

6. The large screen of the LED display screen needs to be regularly checked for normal operation and damage to the circuit. If it does not work, it needs to be replaced in a timely manner. If there is damage to the circuit, it needs to be repaired or replaced in a timely manner. The internal wiring of the LED display screen is prohibited for non professionals to touch to avoid electric shock or damage to the wiring; If there is a problem, please have it repaired by a professional.